ApiaryActiveLive
Try: pause · settings · learn · wipe
← Community / Reading Room
BY
nature · 24 min read

Before You Say the Lichen Grew, Find the Same Patch of Bark

By Austin Little

By Austin Little

AI disclosure: Drafted with AI assistance for Apiary. The bark photo examples are invented for illustration. The field programs and instrument measurements described here come from the linked agencies and researchers.

There is a practical problem with taking a photograph of a lichen you plan to find again. Once you crop it tightly enough to see its edges, you may have thrown away every clue that tells you where to look. The original was on a tree near a bench, on the side you were facing when the weather was pleasant. Six months later the bench is still there and several trees seem to fit. Even when you find the right tree, a green patch in damp weather may look surprisingly different from the dry one in your first picture. Both photographs can be sharp. Sharpness won’t give them a shared starting point.

A better record begins one picture wider than you think you need. Capture the surface and the features around the lichen before getting close enough to see fine detail. Then work out what you want the pair to show: a repeated observation, a change in appearance or a measurable change in the occupied area. Each calls for different evidence. Finding your subject again is a satisfying result on its own.

Pick a question the same patch can answer

Before setting out, decide whether your object is an individual patch, several color bands on one trunk, or a more general walk in which you notice where lichens occur. The units produce different evidence. Fixed repeat views can help a visitor see changes at one address. A walk through varied trees can reveal how much you have missed before. Neither is designed to establish that lichen cover across a whole park increased.

A practical small project question might be: “Can a second person return to these three chosen patches and recognize a stable visible edge over a season?” Try that first rather than asking how fast they grow. An honest answer may be that you cannot re-find one patch or that lighting obscures another. That outcome tells you which observation paths are reliable, without implying an organism failed to behave as predicted.

Choose an address that doesn't depend on moving things, entering a closed area, or revisiting slippery slopes. Accessible old wood or bark from a permitted trail can work better than a high-contrast patch found off-route. The goal is to make repeated records possible without turning the site into a marker board. Leave physical labels, tapes or paint out of a casual study. Don't scratch a calibration mark on the tree or rearrange branches to match an old scene.

Explain why you picked the patch. A dramatic margin is easier to photograph than a pale crust folding into a bark crease. If you select the easiest edge, that is sensible for a repeatability exercise but is a biased sampling rule for general growth claims. If you later compare several forms, give the difficult ones their own unresolved outcomes. Do not quietly substitute easier species and preserve the appearance of a planned representative sample.

A trunk is a living address book with unstable numbers

A lichen is an association built around a fungus and a photosynthetic partner, often an alga or cyanobacterium. The visible body scientists describe as a thallus can take different growth forms. Some look closely pressed onto the surface; some make flattened, leaflike lobes; some branch away from it. Those are helpful starting points for describing what you see, not shortcuts to a species. A round crusty patch and several lifted lobes nearby can belong to different organisms. Before you compare sizes, decide which feature in the picture is supposed to be the subject. National Park Service: lichens of Pictured Rocks

On bark, an obvious reference might be the crossing of two bark grooves next to a knot. It may work better than marking the tree, which is unnecessary and can harm the surface or violate site rules. A wide photo shows which side of the trunk you used, with a landmark far enough away to find from the path. A mid-range photo relates the bark features to the patch. A detail photo preserves the edges or color you are curious about. Each earns its place. Three nearly identical detail photographs, all missing the reference feature, are not an equivalent record.

A rock wall can create the same problem differently. The blocks might repeat, and a seam that looks distinctive close up may recur in every row. In an outdoor site that may be maintained, a stone may be removed or reset. Depending on the purpose, a useful note might specify the course of stone, proximity to a fixed feature and the angle of the picture. Don’t scratch identifiers into surfaces or add tape, paint or markers where you don’t have permission. Choose a place you can revisit without disturbing the subject.

You don’t have to make a public location post to make a private record repeatable. A nature club that returns to an ordinary public route may keep enough information in its own notes to match a feature from year to year. Plans to publish coordinates, unusual species or sensitive records need a separate decision; the comparison doesn’t rely on them. For teaching, labels such as “north side of the example tree” can be enough as long as the actual observers have a reliable way to find it.

Give the next image a useful hierarchy of addresses

A repeat needs more than a close-up. Use the broad context to find the tree or surface and the middle context to find the patch, then a close view for the edge. Record a route-relative location without sharing precise coordinates for sensitive places. A visible cluster of branch forks or a bark seam can provide a useful natural address. A stone or twig that might move with weather is a weaker reference. Review the trail rules for where you can stand with your camera, and choose a different patch when the needed view would disturb the site.

At the middle distance, preserve three or more recognizable features around the patch where possible. A branch fork above and a fissure to the left can resolve orientation, while a third off-axis reference helps reveal whether you drifted around the trunk. Photograph those features and describe their order in a few words. It matters that the same feature appears in the same relation to the patch; a fissure on the opposite side of a tree may also resemble a Y.

In the close view, define the observation edge deliberately beforehand. A caption could say, “Look between the two dark bark islands, beginning at the narrow fork and stopping where the flake turns upward.” This gives even a future self a segment to assess. You can observe the other parts when possible, but do not manufacture a contour result by tracing through a reflective corner nobody could see. Stable address and visible edge each deserve their own go or no-go decision.

A folded field record can group names such as Tree B, face toward path, patch 2, edge quarter southeast. If the term southeast is only an orientation inside the photograph, say image lower right instead. Compass direction and image direction are not synonyms after rotating a phone ninety degrees. Put a note on how to orient the overview or use stable labels tied to the underlying living surface, not the photographer's first file orientation.

Return after a week and give the record to a second person who was not on the first walk. Ask them to find the exact bark patch without coaching, and compare recognized features instead of accepting “yes, these look alike.” If they cannot, improve the address from the accessible path or leave that original pair unmatched. A confident visitor can identify the wrong nearby patch for months and produce a beautifully consistent record of the wrong thing.

Why the surface can look different before it gets bigger

Lichens can change appearance with hydration. Researchers measured reflected light in wet and dry specimens of several Antarctic lichens and found species-specific differences. In some specimens reflectance changed between states; the pattern was not uniform across those studied. Those measurements were made using instruments under controlled conditions, not by reading color codes from a phone photograph. The transferable lesson is modest: a difference in color can be real without being new growth or evidence of a loss. Barták and colleagues: wet and dry reflectance measurements

A phone adds another layer of variation. Its automatic settings may change brightness and color balance between a sunny visit and a shadowed one. A very dark surrounding surface might make the camera expose a patch differently even when the day looks the same to you. After cropping, a background change that prompted the automatic adjustment may no longer appear in the frame. If color matters, note the shade and whether the subject looked dry, damp or visibly wet. Save an original copy and avoid comparing two versions previously brightened with different effects. Those choices do not make the phone a calibrated scientific instrument. They reduce problems you can anticipate.

The background itself can be part of the apparent change. Wet bark can darken while the patch’s outer margin appears much clearer than it was in weaker light. Cracks and deep shadows can either merge with a dark surface or make a pale form stand out. A reviewer confronted with a clear margin in one picture and an unresolved margin in the other should resist making both outlines seem equally certain. “Boundary visible here, unresolved there” describes a photo pair more accurately than guesses built into two clean outlines.

It is worth specifying that “wet” can describe a visible surface condition, not a measured internal water content. If you want a comparable dry photograph, return after ordinary drying conditions rather than spraying a living surface or manipulating it. Record the uncertainty if the surface looks damp but you didn’t see when it got wet. A pair can still show a useful observation of appearance under different conditions. It need not answer the longer-term growth question.

Keep repeatability and biological change in different columns

What looks like image change is a mixture of elementary things: the organism, hydration, surface angle, lighting direction, camera processing, focus, and the observer's tracing. You rarely need to estimate the contribution of each. You do need a way to decide whether a proposed difference is larger or clearer than the ordinary variation your method can create.

Start with same-visit repeats. Imagine one photograph from your usual viewpoint and a second taken after you take a step back and find the frame again. If the references and margins seem to shift almost as much as the seasonal comparison, the latter is not convincing evidence of biological extension. The useful next step is to improve the recording or restrict the comparison to a more legible landmark. This is a check of the method, not a report of the patch's growth.

A third repeat can deliberately vary one observation factor. Take the second picture in the same natural conditions from a slightly different permitted distance and note the change, or wait while a moving patch of shade passes. Do not wet, touch, pry, or otherwise manipulate the patch just to produce a control. You want a record of sensitivity to the kinds of variation you are likely to encounter from the trail.

Ordinary phone processing can change how a weak edge appears. Changing lens, zoom, portrait effects or exposure behavior can make the center look nearly identical while rendering edges differently. Save the original before cropping or annotating. A separate display derivative can be useful, but don't compare a hard-edged interpretation on one date with the unedited image on another. Keep changes such as cropping, tonal adjustments and rotations obvious in review. If an indistinct area is made to look precise only by sharpening, mark the observation as uncertain.

The comparison can be useful without numerical measurement. “The pale margin still reaches the top of the same bark island; the lower edge cannot be traced in either photo” is a repeatable observation. A figure labeled 7% growth suggests actual calibration and a defensible common area. Without those, a stable description of crossings and contact at visible references is more informative. A little extra precision in language is preferable to fabricated precision in a number.

Match the frame before you compare the edges

Suppose an image editor opens a 2024 photo next to one from 2026. The newer subject takes up a much larger portion of the frame. Easy headline: the lichen has spread. But a closer image could do exactly the same thing without any biological change. Automatically fitting both crops to the same display width may conceal the original difference. If you preserved the mid-range image, align identifiable details in the surrounding surface before interpreting the central patch.

When it is safe and permitted, a handheld scale held near the same plane as a subject can improve an image intended for measurement. Don’t lean on the lichen or force the surface into a flat shape. A scale held noticeably closer to the camera than the bark will not translate directly to the size of the patch in the photograph. If the object is curved, the measurement may represent a flat projection rather than true surface area. It is better to label such a pair “visual comparison only” than report a spurious percentage to the nearest tenth.

Perspective gives a second reason to match framing. At an angle, a flattened shape can look narrower or wider than it appears from straight on. On rounded bark, a margin may curve out of sight even when the reference knot remains visible. A distant photograph cannot reveal the same details you captured in close view. Compare the shared visible area and circle uncertainty outside it. In many cases a useful claim is no more numerical than “the margin appears to have extended past this groove,” and only then if the shared reference really is clear in both pictures.

There is a simple warning sign. If the photo pair suggests the lichen gained area and at the same time the adjacent knot doubled in apparent size, you have probably changed the scale of the comparison. If the knot and grooves align but the color differs, weather and camera settings remain candidates. If the same tested region and conditions remain consistent and a clear margin moved relative to adjacent features, it is reasonable to describe visible change. A claim about how fast that type of lichen usually grows would still require much more than one pair.

Know what professional biomonitoring actually records

The National Park Service describes lichen biomonitoring in parks of the National Capital Region. The work includes fixed study plots, records of species and chemical analysis of material from a selected species. That gives researchers distinct information about the community and the substances measured in the collected material. The point isn’t to copy professional sampling on an informal walk. The point is to understand why the program reaches conclusions a picture from a single tree does not support. NPS: lichens and air quality monitoring

Many people have heard that lichens tell you something about air quality. The statement is useful when you know which lichens, which measurements and which comparison. Some species tolerate conditions that affect others. A visible patch on the street outside a building does not certify clean air outside or inside it. Its absence does not diagnose local exposure. Absence might reflect the surface, light, recent cleaning, moisture or the limits of a quick search. Even a well-matched photo pair can describe changing coverage at one spot without establishing a pollutant or its source.

The same caution applies to tree health. Lichens on a normal bark surface are not sufficient evidence of a tree disease. The Park Service makes this distinction in its interpretive material at Pictured Rocks and Fort Matanzas. If someone’s question is whether an old limb is structurally safe, one photograph of surface growth does not answer it either way. Keep the observations about the lichen separate from decisions about a limb. Do not scrape it off to see whether the wood “recovers.” NPS: Pictured Rocks lichen overview · NPS: Fort Matanzas lichen overview

A Forest Service guide to national lichen data shows another distinction worth borrowing: you need to know how plots were searched and how abundance scores were recorded before using the data. A five-minute photograph session near a bench does not reproduce that design. It can be a useful low-disturbance record of its own. Treat the protocol as a reminder to state your viewing scope and method instead of making identical claims with very different evidence. Forest Inventory and Analysis lichen database user guide

Work through an apparent gain at a chipped landmark

Suppose a synthetic comparison tracks an irregular pale patch on a tree along a permitted loop. In May, point A is a fork in a dark crack. Point B is the tip of a loose-looking bark flake, and point C is below a knot. A June image looks greener and covers more of the visible area near B. A quick note says it grew toward the flake. On a second read, B is smaller in June and a raw-looking edge has appeared beside it.

The edge could have moved with the changing substrate rather than grown across it. A flake could vanish, curl, be hidden by a reoriented view or simply become more visible under side lighting. Do not pick one without evidence. Label B an unstable reference for this pair. Compare A and C only where the original reference surfaces remain identifiable. If both show no distinguishable shift, say so; do not use the observation to establish that growth stopped.

Now imagine the next image shows a smaller overall patch, with the same two accepted reference points. A patch could lose visible extent or be obscured. The repeated locations alone do not establish the biological cause. A conservative sequence can read: “May baseline; June lower reference changed, cannot assess margin; August fixed fork visible, no continuous patch visible across the earlier portion near C.” A conclusion about the organism's condition can wait for better evidence or relevant expertise.

Separate an edge outcome from its interpretation using a short side-by-side review. In one column write the visible reference match and record uncertainty. The other can hold possible explanations such as occlusion, weather, substrate change, or biological change. Do not pick the most dramatic explanation because it makes a nicer caption. If a blind second reader cannot agree on where the baseline edge was, any confident narrative for the change is ahead of the evidence.

The benefit of a repeat is often the record of ordinary change in a place, not proof of the expected pattern. A chipped landmark is itself valuable evidence that what you thought was a fixed frame is unstable. Do not erase the difficult date to make the images line up. If your visible record begins over once a new stable edge is selected, state the new baseline instead of connecting it numerically to an incompatible earlier record.

A worked example with three captions that can survive a return trip

A nature club has two images and wants to use them as a before-and-after display. The older shot was taken on a dry afternoon and includes bark around the margins. The new one, made on a wet day, is a close-up of what looks like the same patch. In the new picture the margin looks green, and one lobe appears to reach across a narrow fissure. Only one edge of the old bark reference is included in the second crop.

A first caption might read “The same trunk on two visits; the patch is probably the same, but framing limits the match.” That is a valid status and can be improved later. A second caption, once a wide photo confirms the location, might say “This patch appears greener when photographed wet; the photos were made under different light.” Now the caption gives the viewer a difference they can see without telling them which factor produced it. A third caption, after a comparable return shot, might say “The visible margin crosses this bark fissure in the latest photograph; it appeared short of it in the earlier dry frame.” That keeps the evidence local. None of the captions needs to supply a growth rate or a cause the club didn’t measure.

There is also a fairer outcome than choosing whichever side of the comparison looks persuasive. If a shared margin can’t be assessed in two frames, print both as separate observations and take a new baseline. The next person doesn’t have to decipher your incomplete pair. They can start with a dependable wide shot, a note about the approach and an unedited image. Preserving a flawed old photograph is useful when it has a date and your uncertainty stays attached to it.

For a school activity, give two people the original frames instead of pre-cropping them. Have each list the shared reference points and identify regions they cannot reliably align. A disagreement can tell you where the pictures are ambiguous. The count of agreements is not a formal validation, but it keeps the group from mistaking one editor’s neatly traced edge for a feature everyone could see. Compare the lists before reaching for image-enhancement tools; filters can strengthen both evidence and misleading artifacts.

Put seasons and interruptions on the record

A patch seen after rain may not be comparable to a dry-season reference. Design a small set of paired observations under recognizable conditions. When circumstances allow, compare mornings under broadly similar shade, recent rainfall state and angle, and document if the observation differs. Do not call recent rainfall an exact measurement of thallus hydration. A surface can retain or shed moisture differently by position and exposure.

Wind, litter, and seasonal foliage limit visibility. If a leaf rests near the edge, do not pull it aside without knowing that doing so is permitted and harmless; choose to leave the obscured portion unresolved. A year with a closed route yields missing data. It isn't a series of zeros or a sign that the original patch was inactive. A natural unvisited interval can be included in notes without shaming the people who followed a closure or changed plans around bad weather.

Use qualified phrases for temporal evidence: “the edge was visible by July 20,” “no matched view between the June and July visits,” or “first photo in which the shape is clear.” These differ from a claim that the change occurred on July 20. Record the actual observation window rather than interpolating an event date just because it produces a satisfying timeline in a chart.

A casual observer who sees noticeable coverage growth on the dark side and steady cover in the sunny view may be tempted to explain the whole tree in terms of moisture. Two selected views share some influences and differ in many others. Consider recording only what the study can support: different appearance histories on those two observation surfaces. A larger comparative project can define paired selection criteria and controls, or turn to a published study with a method designed for that broader question.

Decide what the camera should not do

Image matching tools can be useful for bringing two views into registration, but reserve a copy of each original and be clear if software changed the geometry. An automatic panorama-style alignment can stretch part of a frame so surrounding bark looks more consistent. That may be fine for asking whether both photographs show the same location. It may quietly erase or invent the shape change you want to measure. A simple side-by-side view with a marked shared reference points out what you can compare without repairing the evidence first.

For the same reason, a tracing tool should not define the margin just by following color. If a wet patch darkens, a threshold could redraw its apparent edge even where the underlying structure has not moved. Record the distinction between color boundary and visible physical margin when you can. You might prefer a note about two individual lobes you can both identify rather than an area calculation that assigns every softly shaded pixel to one side or the other. The simpler observation is more defensible.

Make annotations preserve doubt

Crop contact sheets around stable reference features, but retain all original frames. On a review copy, you can show a dashed interval around an uncertain boundary instead of a hard line. A legend should distinguish areas you could not see, visible non-lichen-looking surface, and the edge you actually traced. None should be represented by the same blank fill when doing so changes the reading.

An overlay made by aligning two landmarks can suggest closer correspondence than exists across a curved trunk. Alignment at the center and lower right may still leave the near side warped. Compare the rest of the natural references before treating colored pixels outside a line as change. If visual alignment isn't trustworthy without aggressive warping, don't force it. Have the observer cross-reference paired pieces of bark rather than asking an image tool to reshape one visit until the pattern looks supportive.

Train a second reviewer with a clear example and an unresolved one. Give both the date-blind pair if possible, ask how much of the edge is visible in each, then compare independently noted features. A split finding is data about readability. If the conclusion rests on one poorly aligned stretch, narrow the claim to areas of agreement or record it as inconclusive. Avoid adding a second reviewer only after you see a result you wish to keep.

Let absent values remain absent for the appropriate reason. “Missed visit,” “wrong patch,” “new obstruction,” “unmatched angle,” and “edge not discernible” all block interpretations differently. A future photographer can fix an angle problem by matching context; they cannot use an annotation program to repair a missed visit. A small set of evidence codes keeps the next effort directed.

Set up the next photographer, even if that is you

Before you go home, make a small contact sheet from the three views. Label what you actually see: a flat patch on bark with visible lobes, a crustlike spot on a stone, or possible lichen with identity unconfirmed. Put the date and viewing conditions on the record. If you observed a patch over months, keep the intervals exactly rather than rounding two irregular visits into one season. An interested person should know what to look for and what not to infer from your initial scene.

A follow-up doesn’t have to be elaborate. Look for the same reference, produce the wider version before the detail and note whether the surface and light are comparable. Save a new baseline if maintenance or bark loss makes the old one unusable. In a notebook it takes one line to mark a reference as lost. That is more informative than finding a near match and silently substituting it. The practice protects the natural history: future readers get to see what was observed, not what a tidy slide needed to say.

There is even a place for the photograph that was too pretty to leave alone. Keep a version for illustration if you want to bring out the texture, and retain an unaltered version in the observation record. Use a caption where the visually enhanced image won’t be taken as instrument data or proof of a biological change. The comparison and the story can coexist if they don’t have to do each other’s job.

A lichen is small enough to reframe with one step. That is exactly why the method matters. Find the same patch of bark; notice what the weather and camera changed; only then compare the edges that are really visible in both frames. It is a simple pleasure to go back to a familiar route and know you’re looking at the same thing. A useful record starts there, well before it starts to measure whether that thing grew.

Leave evidence for the next reader, not just the next season

Write one reusable method card with your permitted access route, approximate viewpoints, camera choices that mattered, and the exact edges that qualified for comparison. Add a worksheet with visit date, observation conditions, photo IDs, reference match, edge result and uncertainty notes. An inventory of files alone doesn't tell a friend which two photos belonged to the main baseline. A comparison should cite its source pair, not only the resulting overlay.

If sharing an example to teach, strip precise site details where appropriate and don't invite visitors to stand too close to a sensitive substrate or leave a trail. Consent and authority to visit or take a picture do not imply that every image needs publicly searchable coordinates. A representative example can describe a publicly permitted loop and a nonsensitive reference without sending someone to a fragile site.

Decide in advance when to call the monitoring practice finished. A path closure, loss of the comparison reference, or a safety issue is reason to stop observing the specific frame, not a challenge to recover it at any cost. If a familiar patch ends, another observation can start without turning that into a continuous trend. Document the break.

A strong conclusion can be deliberately small: three attempted repeat views, two confidently matched, one unmatched; one visible contrast change after wet conditions, no support for a size estimate. That does not diminish the pleasure of seeing a lichen more clearly. It makes the result worth returning to, because the next person knows not just what you saw, but what they would have to see before changing the answer.

Practice on a stationary reference away from the living surface

A cardboard practice sheet can answer a useful camera question without involving a real patch. Draw a few irregular islands and give one island a faint dotted boundary. Take a straight view, a slanted view, and a repeat after putting the phone away. Label the files only after they are captured. A partner can try to identify the same features and mark which edges are recognizable. Nobody needs an accurate lichen illustration; the point is to find the camera and notation conditions that make boundaries hard to relocate.

Try using the center feature as the only alignment anchor. The distant islands may still appear displaced. Then use the arrangement of three references and see whether the faint edge remains uncertain. That exercise illustrates why a centered bark feature alone can't validate apparent growth. It doesn't give a numeric uncertainty estimate for a curved live surface. Preserve that limitation rather than presenting the result as camera calibration.

Transfer what actually helped to the field. If a broader reference frame made it easier to reconstruct orientation, put that in the method card. If a second person struggled with your label “near the right edge,” name the orientation reference. If contrast processing made the practice pattern look more certain than you expected, keep that as a reason to review originals first. Testing the routine on your kitchen table makes it less tempting to manipulate a living surface when you reach the trail.

Sources and field references

Frequently asked
What is Before You Say the Lichen Grew, Find the Same Patch of Bark about?
By Austin Little
What should you know about pick a question the same patch can answer?
Before setting out, decide whether your object is an individual patch, several color bands on one trunk, or a more general walk in which you notice where lichens occur. The units produce different evidence. Fixed repeat views can help a visitor see changes at one address. A walk through varied trees can reveal how…
What should you know about a trunk is a living address book with unstable numbers?
A lichen is an association built around a fungus and a photosynthetic partner, often an alga or cyanobacterium. The visible body scientists describe as a thallus can take different growth forms. Some look closely pressed onto the surface; some make flattened, leaflike lobes; some branch away from it. Those are…
What should you know about give the next image a useful hierarchy of addresses?
A repeat needs more than a close-up. Use the broad context to find the tree or surface and the middle context to find the patch, then a close view for the edge. Record a route-relative location without sharing precise coordinates for sensitive places. A visible cluster of branch forks or a bark seam can provide a…
What should you know about why the surface can look different before it gets bigger?
Lichens can change appearance with hydration. Researchers measured reflected light in wet and dry specimens of several Antarctic lichens and found species-specific differences. In some specimens reflectance changed between states; the pattern was not uniform across those studied. Those measurements were made using…
References & sources
  1. Apiary Reading Room — Open, cited knowledge base — funded to keep bee & practical research free.
From the Apiary Reading Room. Opinion & editorial — not financial advice. We don't overclaim.
More from the Reading Room